Reusable flexible polyurethane drain seal for temporary emergency protection of stormwater grates from spills of oil, fuel and other liquids. Select a cover large enough to overlap the entire drain frame and seal against clean, reasonably flat surrounding ground.
Available sizes
450 × 450 mm, 600 × 600 mm, 900 × 900 mm and 1200 × 1200 mm. Confirm chemical compatibility and site conditions before use.
Application
Deploy over the grate as an immediate temporary control while the spill source is isolated and cleanup begins. Clean and dry after use, and inspect before reuse.
| Weight | 5 kg |
|---|---|
| Size | 450×450, 600×600, 900×900, 1200×1200 |
Product Identification & Verification Record
| Product: | Polyurethane Drain Seal |
| SKU: | Not specified |
| Category: | Drain Protection |
This record identifies the product listed by Spillkits and provides a direct link to its current online product information. Use the product page and any supplied technical documentation to check dimensions, capacity, material compatibility, intended application and other requirements relevant to your site.
Be the first to review “Polyurethane Drain Seal”
Emergency Spill Response: The 5 C's Guide
- CONTROL the Source & Risk: Ensure appropriate PPE is donned before approaching any hazardous release.
- CONTAIN the Spread: Deploy containment barriers, socks, or bunding.
- COMMUNICATE the Hazard: Alert personnel, restrict access, and notify WHS supervisors.
- CLEAN UP the Liquid: Apply absorbents, pads, or pillows. Sweep up saturated materials and dispose of waste safely.
- CHECK & Restock: Inspect the area, remove hazards, dispose of waste correctly, and restock equipment.
Related products
Drain Protection
Reviews
There are no reviews yet.